originally $1,002,510
Contact Seller
Or call (561) 220-0330
Used Baltic Yachts Vismara Baltic 61 Racer and Cruiser Sailboat For Sale 20 pictures

Boat Description

A magnificent example of the established collaboration between Judel Vrolijk Baltic Yachts.

Aledoa is full carbon/epoxy yacht with hull lines optimized for performances and easy sailing in any conditions. The three-spreader High Modulus Carbon mast and main boom by Hall, with swept back spreaders, provide plenty of sail power in light wind conditions.

A fantastic yacht for owners looking for quality built yacht with special attention to performance and easy handling.


The main goal with this project was to create a comfortable and safe cruising yacht but with high priorities on optimizing sailing performance. In order to create top level performance characteristics it is important that the yacht is kept light. High technology in material and construction are the main tools to achieve this. Carbon Epoxy Vacuum infused laminates were used for deck and hull and this plus bulkheads and interior flat panels produced in Baltic Yachts unique laminating press granted an optimum result.

Detailed weight studies by Baltic Yachts and extensive VPP calculations, including CFD studies, by the Naval Architect, Judel/Vrolijk co, running several variations in displacement and sail areas against each other guaranteed that the performance criterias would be reached.


Baltic Yachts was founded 43 years ago in 1973 by five men looking to build superior yachts or superyachts - that would give them the edge over their competitors. Baltic Yachts is now one of the leading names in custom and semi-custom made luxury saliboats.

The Baltic Yachts yard is located in a village of Bosund on the West coast of Finland. Here they have developed an excellent facility which is a jewel in the yacht building industry.

The first yacht built by Baltic Yachts Ltd was the Baltic 46 in 1974. Since then they have built custom and semi-custom built yachts for sale in all sizes from 38ft to 152ft.

Additional Specs, Equipment and Information:

Boat Name

Builder: Baltic Yacts / Vismara
Designer: Judel/Vrolijk
Flag of Registry: Italy
Keel: Fin

LOA: 64 ft 5 in
Beam: 15 ft 4 in
LWL: 58 ft 5 in
Minimum Draft: 11 ft 3 in
Maximum Draft: 11 ft 3 in
Displacement: 35825 lbs Dry Load
Ballast: 13249 lbs

Total Power: 125 HP

Engine 1:
Engine Brand: Yanmar
Year Built: 2006
Engine Model: 4JH3-DTE
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 1500
Propeller: Folding propeller
Drive Type: Direct Drive
Engine Power: 125 HP

Fresh Water Tanks: 1 Stainless steel (209 Gallons)
Fuel Tanks: 1 Stainless steel (196 Gallons)
Holding Tanks: 1 Stainless steel (66 Gallons)

Number of single berths: 5
Number of double berths: 1
Number of cabins: 4
Number of heads: 4

TV set
Wind speed and direction
Navigation center
CD player
Cockpit speakers

Fully battened mainsail
Gennaker/Cruising spinnaker
Furling genoa

Steering wheel
Electric winch

Inside Equipment
Battery charger
Deep freezer
Electric head
Microwave oven
Air conditioning
Bow thruster
Electric bilge pump
Sea water pump
Manual bilge pump
Fresh water maker

Electrical Equipment
Shore power inlet
Electrical Circuit: 220V

Outside Equipment/Extras
Swimming ladder
Cockpit shower
Hydraulic gangway
Teak sidedecks
Cockpit table
Teak cockpit
Electric windlass

Bimini Top
Mainsail cover

Additional Information


The yacht conforms with the essential safety requirements of Directive 94/25EC (Recreational Craft Directive) and is certifiedcategory A Ocean (or Cat B whichever is appropriate)



Sandwich construction. Laminate vacuum infused Carbon/Epoxy. Foam core. Postcured under vacuum at 60C temperature. The hull is coated with Speedy Carbonium racing antifouling.


Fixed keel with stainless steel fin with a lead bulb.


Sandwich construction. Laminate vacuum infused Carbon/Epoxy. Foam core. Postcured under vacuum at 60C temperature. Topsides have been re-sprayed with AwlGrip in 2013. Teak deck on side decks, coachroof, cockpit floors and seats and on the coamings.

Composite flush deck hatches

Hardened glass cabin windows


Structural bulkheads as well as constructional panels in Carbon fibre/ Epoxy laminates. Prefabricated in a laminating press. Visible surfaces are teak faced.


Fin keel with high-grade stainless steel fin and lead bulb. The keel fin has a top plate recessed into the hull spreading load over a larger area. Cantilevered semi-elliptical balanced spade rudder moulded in carbon with PVC foam core. Vacuum-pressed tapered carbon/epoxy rudderstock passing through JP3 self-aligning roller bearings.


Engine gearbox:

YANMAR 4JH3-DTE 125hp 4-cylinder turbo diesel engine with approax 1500h, July 2016. Freshwater engine cooling The engine has been regularly serviced by certified technicians.

ZF Reduction gearbox with Saildrive leg

Morse single lever control

Propulsion Steering:

Max Power R 206.3 hydraulic retractable bowthruster

Brunton 4-bladed folding propeller

Twin 5-spoke carbon helm wheels in clear carbon with composite steering pedestals

Vectran steering cables


12 V/DC 60Ah starting battery

Mastervolt LI-ION house batteries 24V/DC 600 Ah

50 Amp start battery alternator

110 Amp 24v high output secondary alternator for charging service batteries

230 Volt Ac shore power

DC/AC Inverter 5kW, Mastervolt Model Mass 24/5000

24vDC domestic systems with 220vAC via shore-power, inverter or generator

24vDC 60Ah engine start battery

24vDC Mastervolt Li-Ion service batteries with 600Ah capacity

Mastervolt Mass 24/100 100A battery charger.

Mastervolt Mass Sine 24/5000 5kw Inverter

Fischer Panda AGT 4kw 24vDC generator

Baltic Yachts custom made with automatic safety circuit breakers. Indication diodes, amp. meters, voltmeters and tank level meters are provided.


Fresh Water:

60 litre water heater. Heated by engine cooling water or by 220vAC immersion heater element from AC system.

Water pressure system with outlets in heads and galley.

Telephone type shower, water faucet for cold and hot pressurized water.

Deck shower outlet warm cold.


Spectra Newport 400 GPD (106 L/day) 24 VDC watermaker

Bilge Pumps:

High capacity electric bilge pump with automatic switch

2x manual bilge pumps

Hydraulic System:

Hydraulic 24V/DC Power Pack with two motors controlling mainsail outhaul, genoa sheet sliders and bowthruster via buttons at helm pedestals


Fuel: 740 litre fuel capacity

Fresh Water: 790 litres water capacity

Holding tank: 250 litres Blackwater holding tank


Navigation equipment:

BG Hercules Race pack with 4x mast-mounted repeaters

Autohelm 6001 autopilot

Simrad CX44 radar/plotter display with GPS

Dell PE750 SATA PC computer system

Twin steering compasses

Communications Equipment:

Simrad RS87 VHF with DSC

Thuraya Mini-M sat phone


Stainless steel sink with hot and cold pressure water

Kenyon pop up electric stove

Microwave oven

24vDC refrigeration system with twin front-opening fridges and freezers

Trash compartment

Extractor fan

Teak covers for galley equipment when not in use

Kenyon pop up electric stove


2x Tecma electric heads

Hot cold pressurized water supplies with shower in heads


CLD HSCS24D reverse cycle air-conditioning and heating system


Alpine CD/DVD/radio stereo system with Bluetooth and speakers in saloon and cockpit

Samsung Syncmaster LCD TV with Digi-box

RR Ramert Antenna


Forepeak/crew cabin with berth, toilet and locker, entry from deck hatch; next aft separated by watertight bulkhead is the master cabin with centerline queen size berth, hanging lockers starboard, en-suite shower and head to port;

Next aft to starboard is the galley; opposite to port is the salon; aft of the salon is the nav station; next aft port and starboard are heads with showers and guest cabins with lower double berths and upper single berths.

Accommodation Finish:

Advanced lightweight construction techniques used in construction of the interior. Structural bulkheads as well as constructional panels in carbon fiber/ epoxy laminates.

Prefabricated in a laminated press.

Visible surfaces are teak faced. Teak and holly soleboards

White headlinings

Cream leather upholstery

Red cloth upholstery in accommodation cabins

White cloth curtains

Skyscreens for opening deckhead hatches


Rig: Triple spreader high modulus carbon fibre mast (high modulus) by HALL Spars. Rig checked and repainted January 2015

Twin backstays

Carbon fiber boom by HALL Spars

Carbon fiber bowsprit

Hydraulic backstay, rod vang, outhaul and inner forestay tensioner

Non-overlapping headsails


Lewmar winch package

Primaries (2) 88-3 STOR Electric

Secondary/Main sheet (2) 66-3 STOR Electric

Reef, utility (2) 48 STOR Electric

Halyard at mast base (2) 54 STOR Electric


Mainsail 3DI 2014 - North

Mainsail 3DI 2006 - North

Jib 3DI 2014 - North

Jib 3DI 2006 - North

Gennaker 3DI 2014 - North

Gennaker 3DI 2006 - North

Staysail 3DI - North

Staysail DL - One Sails


Pulpit and pushpit made of Stainless Steel tubes are mounted on the bow and transom.

The pulpit is fitted with navigation lights and the pushpit with a stern light.

Double lifelines are installed passing through S.S. stanchions.

Cockpit table

Manually-activated tender garage door

Bathing ladder

Folding Carbon passarelle

Composite flush deck hatches

Covers Canvas:

Canvas bimini

Anchoring Mooring:

Custom underwater anchor launching system with custom modified anchor/

Lewmar 3000 24vDC electric anchor windlass with gypsy and drum for chain and rope

57kgs anchor with 75m of 10mm stainless steel chain

Tender Outboard:

Zodiac 3.20m tender with Yamaha 8hp 2-stroke outboard

Lying Scarlino - Tuscany

Available to viewby appointment


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Approximate boat location: Italy