Contact Seller
Or call (206) 460-1611
Used Sam L Morse Bristol Channel Cutter Sailboat For Sale 20 pictures

Boat Description

The Bristol Channel Cutter has achieved unprecedented respect as a capable & safe passage maker. Dozens of these handsome, stout vessels have made ocean crossings, circumnavigations and are used as cruising homes by sailors who prefer simplicity, integrity and economy in their choice of boats. Few yachts have a more devoted, if not fanatical, group of owners. "Vixen" is hull #2 of the B.C.C.'s to be built by Sam Morse Co. (previous hulls were built in Vancouver, BC), and was hand finished by designer Lyle Hess's right hand man, Craig Johnson.

Her joinery work is esquisite, her custom bronze hardware would be impossible to duplicate today. Highly recommended to those who seek the highest quality in a well proven cruising classic; a truly special boat.

Recent upgrades include:

New Yanmar 3GM30F fresh water cooled engine with less than 20 hours
Custom Sunbrella full boat cover for complete winter protection and coverage
Upgraded aluminum propane tanks with new safety valves
Rebuilt rudder with old-growth fir and fresh coats of varnish

Additional Specs, Equipment and Information:

LOA: 39 ft 0 in
Beam: 10 ft 0 in
LWL: 26 ft 3 in
Length on Deck: 28 ft 1 in
Minimum Draft: 4 ft 7 in
Displacement: 13800 lbs
Ballast: 4200 lbs

Engine Brand: Yanmar
Engine Model: 3GM30F
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 20
Propeller: 2 blade propeller
Drive Type: Direct Drive
Engine Power: 24 HP

Fresh Water Tanks: Plastic (70 Gallons)
Fuel Tanks: 1 Aluminum (20 Gallons)

Compass - SESTRAL

Hull Information
Schedule: 1.5 oz mat and 24 oz roving = 1 unit
1 1/2oz mat
1 1/2 oz mat and 10 oz cloth
1 1/2 oz mat and 18 oz roving
Five units, one at a time
1.5 oz mat * 24 oz roving up the gunnels, five more units under water, two more extra units in keel area
Minimum hull thickness: > 3/8" at sheer, > 5/8" at waterline, > 1" keel area
Hull strengtheners - longitudinal, floors, etc: Laminated false frames glassed in from the sheer clamp to the cabin sole prior to construction of built-ins.
Deck (beams, etc): 1 1/4" yellow cedar over 1/2" plywood bolted through hull flange on 6" centers. Deck beams are support flanges bolted through 1 5/8" by 3 3/4" full length on 14" centers.
Hull to deck joint type and fastenings: sheer clamp, bolted through hull and bulwark stanchions locks on 14" centers.
Bulkheads: marine plywood: painted and trimmed in mahogany. Key hole bulkheads.
Ceiling: Yellow cedar planking, primarily finished bright, except behind the / no molded interior.
Hull colors: House: off white; Hull topsides: Green; Underbody: Blue anti fouling

Deck Equipment
Bronze spreaders and bronze hardware, bronze boom horse and parrels
Bronze deck hardware: closed chocks and cleats
Full deck canvas cover
Canvas sail covers

Tanbark sails in generally good condition. Most very little use.
Shrouds and stays are 1:19 SS with open turnbuckles in good order.
Chainplates are bronze, and all in very good condition.

Anchors: (1) CQR and (1) Bruce
Stove: Luke Heritage 2 Burner
Toilet: Marine Manual
Bilge pump: Heavy duty WHALE Gusher manual bilge pump @ 30GPM
Heating System: Wood sailor stove
Opening port lights: four round bronze with double dogs
Ice box: yes
Mattress pads and cushions in good condition
Brass lamp
Amplifier with Sony Speaker System

Approximate boat location: Seattle, Washington