Contact Seller
Used Stamas 360 Express Sports Fishing Boat For Sale 46 pictures

Boat Description

JUST REDUCED $5,000!!! This 1997 Stamas 360 Express was repowered in 2000 with twin Yanmar diesels that presently have only 1093 hours. The vessel is well equipped and is in very clean condition throughout! She was designed for cruising, fishing and diving. She is equipped with a half-tower which has a full enclosure, spacious cabin and a very large cockpit for fishing and entertaining. Take a look and you will want to be the proud new owner of this quality built Stamas Yacht!

Additional Specs, Equipment and Information:

Boat Name
Waterfront Dream II

Hull Shape: Deep Vee

LOA: 38 ft 6 in
Beam: 13 ft 2 in
Maximum Draft: 2 ft 4 in
Bridge Clearance: 8 ft 3 in
Headroom: 6 ft 4 in
Dry Weight: 16975 lbs

Total Power: 700 HP

Engine 1:
Engine Brand: Yanmar
Year Built: 2000
Engine Model: 6LY-A
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 1093
Drive Type: Direct Drive
Engine Power: 350 HP
Engine 2:
Engine Brand: Yanmar
Year Built: 2000
Engine Model: 6LY-A
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 1093
Drive Type: Direct Drive
Engine Power: 350 HP

Cruising Speed: 40 mph

Fresh Water Tanks: (90 Gallons)
Fuel Tanks: (372 Gallons)

Number of single berths: 6

Manufacturer Provided Description

The Stamas 360 Express combines hard core fishing and luxurious cruising comfort. The 360 Express offers a variety of engine packages which will maintain speeds in excess of 35 knots for running to the days fishing grounds. Offering one of the largest fighting cockpits in its class, it accommodates a full tournament crew with plenty of room for a custom fighting chair. The 13-foot, two-inch beam and wide walks allow for safe movement forward to the large fore deck. An elegant and spacious cabin is appointed with the finest amenities including a luxurious main salon and a fully equipped galley. The head features a separate shower. STAMAS YACHTS: For forty-five years Stamas has been building boats engineered and built to standards unequaled by any other manufacturer. In that time Stamas has never had a hull failure. In-house research and development, tooling, and manufacturing allows Stamas to provide fresh innovative designs in a timely manner. CAD systems are used to guarantee accurate, true running surfaces as well as consistency in the fit and finish of all Stamas boats. In-house manufacturing provides unequaled quality control of fiberglass parts, interior components, and accessories. Innerliners and decks are fiberglassed to the stringers, the hull bottom, the transom, and around the perimeter at the hull-to-deck joint. The hull-to-deck joint is then mechanically fastened and filled with fibrous bonding compound for additional adhesion and leak prevention. Stamas decks incorporate the exclusive Continuous Core Reinforcing process that bonds a seamless core, sealed in fiberglass, to every area of the decks walking surface as well as all horizontal and most vertical surfaces. Closed Cell Foam Flotation provides insulation, sound deadening, and flotation without water absorption. All Stamas boats meet or exceed all Coast Guard standards, providing foam flotation in all boats through the 290 Tarpon. The hand layup method provides a more consistent and uniform laminate, resulting in a better glass-to-resin ratio, which means more strength and better performance. Constructed of 2-foot Douglas Fir lumber, the stringer system is completely glass encapsulated and laminated into the hull. This process results in unequaled strength and a stringer system that is protected from the elements forever. Stringer systems, transoms, and innerliners are installed before the hull is removed from the mold. This ensures a true running surface and proper fit for years of enjoyment. The running surface extends underneath the integral dive platform reducing drag, properly supporting the transom and providing a stronger, more stable platform to work from. As well, the finest grade of marine gelcoat and resins provides years of high-gloss retention, easy maintenance and trouble-free service. All welded, anodized aluminum fuel tanks are structurally supported and secured to the stringer system. They are pressure tested before, during, and after installation to ensure years of trouble-free service. All wiring harnesses are designed in-house and feature marine-grade tin-coated, stranded wire with heat shrink connectors. Harnesses are loom and tie wrapped before being routed through rigging tubes. All standard equipment and options are placed carefully to guarantee correct weight distribution from port to starboard and from bow to stern. Recessed Trim Tabs are designed as an integral part of the hulls running surface to maximize responsiveness and reduce drag while staying out of the way of your fishing lines. One-piece welded stainless steel bowrails are designed for long-lasting good looks and through-bolted for safety. All fishboxes, baitwells and coolers are fully insulated to keep ice frozen, bait fresh and drink cold. These boxes also drain overboard to keep the bilge clean and odor free. All Stamas helms are designed to accept a full array of electronics providing ideal positioning and a custom fit. Quality control is pro-active at Stamas, stepping in at every point during the manufacturing process to ensure quality workmanship on every boat and every detail; moreover, because Stamas has been crafting quality boats for 45 years these boats enjoy one of the best resale values on the market.

Equipment List

Stamas 360 Express Specifications - Standard Equipment - Two Bilge Pumps w- Auto Float Switch - Cockpit Bolster Cushions - Compass - Enclosed Stand-Up Head w- Shower - Fire Extinguisher System - Full Galley (Refrigerator, Sink, Stove) - Hot Water Heater - Lees Rod Holders - Livewell, Recirculating System - Microwave Oven - Molded Bow Pulpit w- Anchor Roller Davit - Queen Size Forward Berth - Shorepower Hookup - Trim Tabs, Recessed - Washdown, Fresh and Salt water - Two Windshield Wipers

Engine Notes

Yanmar and Volvo also available.
Top speed of boat: 0mph


The private master stateroom is forward with v-berth that sleeps two and has storage below and a hanging locker. The settee and galley is to the port side, convertible dinette and head are to the starboard side. The helm and helm seat are to the starboard side, a companion seat is located across to port with a bait prep station with storage and sink behind the seat. There is a large cooler located behind the helm seat. Both seats have storage below them. The very large cockpit provides room for several guests to fish or to have a table and deck chairs for entertaining. There is a fishbox and two live-wells built into the transom with a transom door in the center to access the swim platform.


– Galley Down
– Refrigerator with freezer
– Origo 3-Burner Electric Cook Top
– Microwave Oven
– Pressurized Water System
– Water Heater

Electronics & Navigation

– Simrad Auto Pilot
– Compass
– Furuno Depth Sounder
– Autohelm Depth Sounder
– Standard VHF Radio with Remote Speaker
– Garmin GPS-Map 3210 with Radar/GPS/Plotter/Depth

Electrical System

– 1-House Battery
– 2-Starting Batteries (Replaced Sept. 2016)
– Automatic Battery Charger
– 2-Shorepower Cords
– 5.5 Nextgen Generator Just Installed September 2016 (Fresh Rebuild)

Deck Equipment

– 2- Fortress Aluminum Anchors
– Bow Pulpit With Rails
– Good Anchor Windlass
– Half-Tower With Eisenglas Enclosure
– Fenders and Lines
– USCG Safety Package
– Navigation Lights
– Remote Controlled Search Light
– Freshwater and Saltwater Deck Washdowns
– Spreader Lights
– Windshield Wipers
– Swim Platform With Swim Ladder and Dingy Davits
– Removable Cockpit Awning and Canvas Cover for the Bow
– 2- Sun Pad Bow Cusions

Fishing Equipment

– Stern Storage/Fishbox
– 2-Stern Livewells
– Outriggers
– 4- Rod Holders
– 18- Rocket Launchers
– Large Built-In Cooler
– Tackle Center w/Sink

Mechanical Equipment & Engine Details

– Twin Yanmar Diesels (New 2000)
– ZF Transmissions
– Engine Alarms
– Dripless Shaft Seals
– Racor Filters
– Raw Water Sea Strainers
– Fresh Water Cooling
– SeaStar Hydraulic Steering
– Bilge Blower
– 2- Automatic Bilge Pumps
– Electric Head With Holding Tank
– Y-Valve With Macerator Pump
– Automatic Fire Suppression System
– Bennett Trim Tabs
– CruiseAir Reverse-Cycle AirCond / Heat

Other Details

– Bottom Painted With Micron -Sept. 2015
– Engines Serviced -Sept. 2015


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Approximate boat location: Punta Gorda, Florida