Pier One Yacht Sales presents this Cruisers 1985 Pearson Sloop boat for sale.
Contact Pier One Yacht Sales with any questions about this Pearson Sloop by filling up the Contact form
To see full description of this boat from the seller click on the Seller Description tab above.
Pearson sailboats were built in Bristol Rhode Island to meet rugged New England sailing conditions. This is an honest reliable and well built boat. You will have a lot of fun and be safe with this boat.
The William Shaw designed Pearson 34 gives you roomy comfortable accommodations and easy handling which heightens the joys of cruising in a boat also designed to be competitive and spirited for club racing. Aft sections are full to increase sail carrying power, and forward, her sections are moderately full to provide buoyancy and a greater measure of dryness on deck. Below decks, a classic arrangement plan is used because it gives, fundamentally, the best use of space. And since this is a centerboard version of the popular Pearson yacht, if you like to explore the back waters of the bays or the more shallow islands in the Bahamas, you will love the 310 draft with the board up.
Call for an appointment to see this affordable comfortable cruiser.
Additional Specs, Equipment and Information:
LOA: 34 ft 0 in
Beam: 11 ft 2 in
Total Power: 20 HP
Engine Brand: Yanmar
Year Built: 1985
Engine Model: 3GMF
Engine Type: Inboard
Engine/Fuel Type: Diesel
Drive Type: Direct Drive
Engine Power: 20 HP
Number of heads: 1
Dimensions and Tankage
Length: 33 10
Beam: 11 2
Draft: 3 10-- 6 10
Displacement dry: 11750 lbs.
Diesel: 22 gal.
Water: 50 gal.
Holding: 25 gal.
Starting forward is the large v-berth area w/filler, opening ports and storage. Moving aft to starboard is the head with shower, pressure water and sink. Opposite the head is a large hanging locker. Next aft to starboard is the convertible dinette w/bulkhead mounted teak folding table and to port a settee. There is generous storage outboard of both settees. The navigation station is next aft to starboard with the quarter berth aft of that. Opposite the nav. station to port is the U shaped galley. Beautiful Teak and Holley flooring, 63 headroom; reading lights; opening ports and 2 overhead opening hatches for ventilation.
This vessel has 120 volt marine air conditioning.
Electrical and Electronics
12 volt system w/ 5 batteries
2- 6v house/2-12v engine/1-12v windlass (can all be combined)
120 volt 30 amp shore power w/ 30 amp cord
VHF radio hand held VHF
Raymarine wheel autopilot
Sails and Canvas
Main sail/slab reefing
Mai sail cover
Head sail/roller furling
Bimini w/partial back sun shade
Deck and Hull Equipment
8 West Marine dinghy (2020) w/anchor
Mantus M2 45 lbs. anchor swivel
Mantus bow roller and snubber
125 5/16 G3 chain
175 8 ply rope
Bruce 35 lbs w/chain and rope
Maxwell electric windlass
Recent Upgrades and Service
Serviced all winches
Installed Maxwell electric windless
Added additional battery to run windless
All new Mantus bow roller
New Mantus M2 anchor 45 pounds and swivel
New Mantus snubber
New 125 ft of 5/16 G3 chain
New 175 ft 8 ply rode
Built chain locker to hold chain/rode
Chain rode marked. First mark is 50 feet. Then every 25 feet is another mark.
New anchor riding sail
Swing Keel serviced: new bushing, serviced swing keel pin, new cable for swing keel, rebuilt swing keel winch; replaced keel bolt spacers
All new thru hulls, Marlon
New head sail halyard
New roller furler line
Added a cockpit winch for roller furling line
Added 5/16 line for anchor riding sail/ raising and lowering dinghy system
Restitched head sail sun cover
Replaced strapping at clew
New exhaust line
New fuel supply line
New motor mounts
New water pump
New raw water pump impeller
Realigned motor with prop shaft after new mounts
Added battery disconnect between house batteries and motor batteries
Added interior LED lighting
Replaced anchor light at top of mast
Replaced all 4 port lights
New macerator pump
New diesel fuel filler cap
New outboard motor mount on back railing for dinghy motor
Replaced safety line covers
Replaced scupper line hoses
New zincs on prop shaft
Cutless bearing serviced
Most of the boat had electric rewired
All cushion foam replaced
All necessary CG safety equipment
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Apply for boat financing in minutes, choose the best loan offer and get out on the water!
Punta Gorda, FL