2015 MAKO PRO SKIFF 17 POWERED BY A 60 HP MERCURY 4 STROKE WITH 352.2 HOURS. MOTOR JUST HAD A FULL 100 HOUR SERVICE AND BRAND NEW BATTERIES PUT IN WITH A 3 YEAR WARRANTY. BOAT COMES WITH A 55 LB THRUST TROLLING MOTOR ALSO WITH A BRAND NEW BATTERY. COMES WITH TRAILER READY TO HIT THE WATER FINANCING AVAILABLE.

Smooth and stable, agile and able. This is the skiff that everyone is talking about.

Thanks to the Advanced Inverted V hull design, the Pro 17 Skiff CC rides smooth and drafts shallow (just 8"/20 cm), making it ideal for both skinny inshore marshes and rough inland waters. And the rolled gunwales keep you drier at cruising speed.

The deck and foam-filled hull are mechanically and chemically bonded to become one unitized structure with superior flotation and quiet operation. And at 17' 4" (5.3 m) long with an 80" (2m) beam, it's incredibly spacious and stable.

Inside, you'll enjoy 360° of fishability, with huge non-skid casting decks fore and aft. The center console sports rod holders, flush-mount electronics-mounting surface, a contoured acrylic windshield, stainless grab rail, an aerated 8-gal. (30.28 L) livewell, and an 85-qt. (80.44 L) rotomolded cooler under the cushioned seat.

New for 2015 is standard 2-tone marine-grade upholstery, 5 hull-wrap color options, stainless steel grab rail options, and an optional Power-Pole® Micro Anchor!

The MAKO Pro 17 Skiff comes standard with a hot-dipped galvanized trailer, a 30 HP Mercury 30 ELPT FourStroke outboard, and our MAKO Assurance limited warranty.

  – Advanced Inverted V (AIV) hull for shallow-water performance w/integrated anti-spray design
  – Forward seat w/8-gal. (30.28 L) aerated baitwell molded-in grab handles
  – Cushioned helm seat w/built-in 85-qt. (80.44 L) cooler
  – NEW 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating composite substrates on seats
  – Aft molded raised casting deck w/non-skid surface open storage space below
  – Bow molded raised casting deck w/non-skid surface
  – Molded interior liner w/non-skid surface
  – Center console w/vertical rod holders, acrylic glass windscreen, stainless steel grab rail, navigation lights, space for mounting optional electronics below-console storage space
  – NEW optional color vinyl hull side graphics package, optional rail package, optional Power-Pole® Micro Anchor system
  – Custom-matched hot-dipped galvanized trailer w/SureLube hubs

Additional Specs

  – Length: 17' 4''
  – Bottom width: 5' 3''
  – Max. recommended HP: 60 HP
  – Fuel capacity: 6.6 Gallons
  – Deadrise: 10 Degrees
  – Draft: 8"
  – Beam: 6' 8''
  – Approx. package weight: 1849 Lbs.
  – Max. person capacity: 6 Persons
  – Max. weight capacity: 1400 Lbs.
  – Max. person weight: 850 Lbs.
  – Approx. hull weight: 950 Lbs.
  – Cockpit depth: 18"
  – Transom height at center line: 20"
  – Storage length: 22' 4''
  – Package height: 6' 8''

Standard Features

Comfort, Convenience Peace of Mind

  – MAKO ASSURANCE best-in-class warranty: limited lifetime structural warranty + 5-year stem-to-stern warranty + 3-year gelcoat warranty + transferable to a second owner
  – NMMA Certified
  – Factory leak tested for hull, plumbing fitting integrity
  – Stainless steel hardware fasteners for corrosion resistance
  – Fire extinguisher
  – Horn

Console(s)

  – Single-cable rotary steering
  – Contoured acrylic glass windscreen
  – Tachometer
  – Molded center console w/integrated 8-gal. (30.28 L) livewell, molded-in grab handles, w/hinged padded seat cushion back
  – Drink holder
  – Flush-mount electronics mounting surface
  – 5 vertical rod holders
  – Under-console storage area
  – Stainless steel grab rail w/side-mounted navigation lights

Construction Exterior

  – Encapsulated transom fiberglass-infused, high-density composite core
  – Hull stringer system, hand-laid chemically bonded for strength durability
  – Integrated 1-piece molded fiberglass stringer grid system w/gelcoat finish fully injected, closed-cell foam flotation
  – MAKO® White gelcoat
  – Molded gelcoat finish on all bulkheads interior parts
  – Molded, patterned non-skid deck, cockpit sole gunwales
  – Stainless steel hardware fasteners
  – 100% composite construction
  – Heavy-duty rub rail

Electrical, Mechanical Plumbing Systems

  – 1,000 GPH (3,785.41 LPH) bilge pump
  – 500 GPH (1,892.71 LPH) livewell pump w/adjustable spray head
  – Centerline cockpit drain
  – Interstate® cranking battery w/tray
  – Marine-grade rocker switches w/push button breaker protection
  – 12V accessory outlet
  – Hardware Accessories
  – 4 stainless steel cleats
  – Reboarding step stainless steel grab handle
  – Stainless steel bow stern eyes
  – Stainless steel threaded garboard drain

Interior

  – NEW 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating composite substrates on seats
  – Portable 6.6-gal. (24.98 L) fuel tank w/hold-down strap
  – MAKO®-exclusive rotomolded removable 85-qt. (80.44 L) foam-filled helm seat/cooler w/superior ice-keeping ability
  – Molded interior liner w/patterned non-skid surface
  – Open cockpit
  – Raised aft fishing platform (closed-molded) w/patterned non-skid surface open storage space below
  – Raised bow fishing platform (closed-molded) w/patterned non-skid surface closed storage compartment

Performance

  – Award-winning Advanced Inverted V (AIV) hull design for superb load-carrying abilities a smoother, dryer ride in choppy waters
  – Factory-rigged w/matched propeller

Trailer

  – Custom single-axle trailer
  – Sure Lube hubs
  – Hot-dipped galvanized construction
  – Leaf spring suspension
  – 4 carpeted bunks
  – Composite fenders
  – Tongue jack
  – Heavy-duty winch w/nylon strap safety strap
  – Transom tie-down straps

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.